GSMForum BD

Go Back   GSMForum BD > GSM & CDMA Phones / Tablets Software & Hardware Area > SonyEricsson > Android Based
Register FAQDonate Forum Rules Calender Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 06-07-2015, 03:18 PM   #1
achyut
Crazy Poster
 
Join Date: May 2015
Posts: 61
Thanks: 10
Thanked 43 Times in 23 Posts
Rep Power: 2
achyut is on a distinguished road
Default Sony Xperia Z Dead Boot Repair

Sony Xperia Z C6602 / C6603 / C6606 / C6616 Dead Boot Repair

Bricked phone symptoms:
can't power on after flash,
no lcd or led reaction for power button,
no lcd or led reaction for charger,
no lcd or led reaction if phone is connected to PC,
your PC can't detect your phone with vol-,
phone does not vibrate when holding vol+ and power together.

Download and run this s1tool: [Only Registered Users Can See Links. Click Here To Register...]

Download Boot repair File [Only Registered Users Can See Links. Click Here To Register...]

Test point Image For C6602


Note : For Other models find test point nd post here


Repair procedure:
Firstly connect turned off bricked phone to your PC. If phone will be detected in device manager as

Code:
qhusb_dload device
you are lucky and this is the end of the first step for you. Just disconnect phone.

If your phone can't be detected at all, you must find testpoint. Disassemble your phone
remove battery and connect each golden point on main board one by one to metal shield and attach usb cable. If your phone will be detected in device manager as flash device or something like that you've found testpoint. Don't forget to take a picture of main board and mark testpoint nd post here

In S1tool choose S1 EMERGENCY MODE, press Flash button, select correct APPSW .sin_file_set file (or you can select whole firmware if you have it in order APPSW, FSP, Elabel .

Press Testpoint READY button




and if your phone is detected as qhusb_dload device, just attach usb cable. If not, perform all steps from point 1 (connect testpoint to GND and attach USB cable).

When drivers will be installed and phone will be detected, program will ask you to disconnect testpoint. Disconnect testpoint from GND and press Testpoint READY button.

After that phone will load emergency s1 loader, re-enumerate usb, load s1 loader, update boot in your phone and flash selected firmware.

After done flash vit full firmware using Fastboot

Credits goes to :juriji
Source: Sony.yt
achyut is offline   Reply With Quote
Sponsored Links
Welcome
To see more of this thread, please login or register.
Reply

Tags
firmware


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
NCK Dongle Android MTK Module v2.5.6.7 - SP Meta IMEI Repair - [6/6/2016] Shanawas NCK Team products 0 06-06-2016 07:07 PM
NCK Box Android MTK Module v1.8.6.9 - World's First SP Meta - [04/06/2016] SWAPAN_MISHRA NCK Team products 0 06-05-2016 12:55 PM
Samsung Tool Pro 25.2. Just look inside. DRK, screenlock, DMVT jaan121 Update News & Stories 0 04-23-2016 05:33 PM
Samsung Tool Pro 25.2. Just look inside. DRK, screenlock, DMVT jaan121 Z3X Samsung 0 04-23-2016 05:32 PM


All times are GMT +7. The time now is 01:58 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
©GSMFORUMBD.COM All Rights Reserved. Designed & Developed By Tech_Support